Specifications

Your complete modular pack includes:

NZ Building Code compliant designs and working drawings

78.7m2 Floor area → Timber subfloor → Underfloor insulation → Prefabrication of the exterior wall panels is our preferred construction method. Unlike traditional housing practices where frames are measured, built, and erected onsite, our prefab walls are manufactured in a controlled environment ready for delivery to site with same day installation → Exterior walls are specified with 140 x 45 (not 90 x 45) laminated veneer lumber (LVL) framing and lined with Oriented Strand Board (OSB Board) external linings → This larger wall cavity and no nogs allow Habitat Housing to achieve an external wall insulation rating of R4.0 in the external walls which is way in excess of the Code requirements → H3.2 Treated pine structural plywood flooring  → Treated Pine roof trusses and roof framing → Pre-painted rib/corrugated profile roofing → Coloured gutters and downpipes → Combinations of vertical Duragroove wall panelling and horizontal Duraplank/Nuline plus weatherboards → Thermally Broken aluminium joinery frames with LOWE glass and Duratec (Marine Grade) powdercoat finish 

.

Wall and ceiling insulation → 10mm thick plasterboard wall and ceiling linings → Wet wall linings to the bathrooms and ensuites → Timber skirting →

Scotia and architraves → Pre-hung doors and satin chrome hardware → Full height Melteca panelled sliding doors to all Reach In wardrobes → 1 x Melteca tower unit with ventilating shelf/hanging rail → DVS Home Ventilation System.

Spacious open plan with ranch slider off living → Flatpacked prefinished kitchen cabinets and pantry, white embossed (woodgrain finish is an optional extra) → Stainless steel dishwasher, 600mm → Stainless steel sink and drainer tray → Chrome sink mixer → Ceramic electric hob → Oven 600mm, built in 5 function → Splashback 748h → Pyramid rangehood 60cm, new wall duct kit.

900 x 900 Shower → Bath 1520mm → 750mm Floor standing vanity → Rimless BTW toilet pan and cistern → Chrome basin and shower mixer with slide shower and rose → Heated fan light & extractor → Towel rail & toilet roll holder.

Laundry → Supertub → Splashback 748h → Plumbed for a washing machine → Storage

Bedrooms

2 x Double bedrooms → Ranch slider off master bedroom (bed 1) → Full height Melteca panelled doors to the bedroom → Reach In wardrobe, white embossed → 1 x Melteca tower unit with ventilating shelf/hanging rail.

Window coverings knockout roller blinds/venetians → 5kg Carpet with foam underlay to all living area floors → SPC planking to all wet areas.

Carpenter

Plumber

Complete exterior and interior paint, 3 coats of acrylic paint to all wall and ceiling linings, doors and finishing lines. NB: Max 2 colours.

Electrician

Prewire and fitoff → Internal sub board and fuses →  Recessed interior downlights & external lights → Fit double and single power points →  Smoke/gas alarms → Stove wiring → Rangehood and duct install - labour → 1 x Inwall bathroom fan → Electrical certification sign-off.

Optional Extras - (POA)

Panasonic heat pump 2.5kw cooling & 3.2kw heating → Solar power 3.7kw 10 panel (design and installation included) → Composting toilet → Rainwater harvesting system → Water Flow drainage system → 19m2 Pine timber deck and rear landing with 1 x set of 3 tread steps to each.

 
OFF Site Building Consent and CCC
An allowance is included to cover these costs, including council construction inspections.
 
Delivery/Foundations
An allowance is included to partially cover these costs, with the balance being paid by the client.

Upgrades to the specifications.

ON Site Building Consent fees, site excavation/access, site services or the balance of delivery/foundations costs. 

Pricing is valid until 30/11/23 and can alter slightly dependent on construction yard overheads in each region.